Skip to main content


The answer is... it depends. There are many variables that can affect your decision, but the following rules generally apply:

Generally, a traditional mechanical press can achieve the highest production speeds, especially when running relatively flat parts with simple, shallow forming requirements. A hydraulic press offers more versatility in tonnage and working energy to allow for more complex processes and forming. A mechanical servo press combines versatility and higher production speeds.

Characteristics of a traditional mechanical press:

  • Fixed stroke length, although variable-stroke-length presses are available from some manufacturers.
  • Special slide motions, such as link motion, are available, specific to a particular press.
  • Variable slide velocity, although slide-velocity profile within a single cycle of the press is fixed.
  • Working energy depends on flywheel mass and speed.
  • Full press capacity near stroke bottom dead center (BDC).
  • Simplicity of setup and operation.
  • Typically the highest stroking speeds.
  • High accuracy and repeatability, with relatively low initial cost.

A hydraulic press generally does not achieve the high cycling speeds of a similar-sized mechanical press, but offers more versatility with its variable stroke length, die space and pressure. A hydraulic press often is the best choice when producing parts with deep, complex forms that require a lot of material flow, parts that require a dwell at the bottom of the stroke (including plastics) and when production speed is not as important.

Characteristics of a typical hydraulic press:

  • Variable stroke length.
  • Slide motion and position control throughout the stroke.
  • Variable slide velocity, even within a single cycle of the press, typically configured as fast approach, slow press and fast return.
  • Full working energy at any speed.
  • Full press capacity at any point in the stroke.
  • Adjustability of stroke length, slide motion and velocity, and working energy.
  • Generally reduced throughput, accuracy and repeatability compared to a mechanical or servo press, with relatively low initial cost.

A mechanical servo press (flywheel, clutch and brake are replaced by high-capacity motors): offers much of the versatility of a hydraulic press at production speeds often approaching that of traditional mechanical presses. Stroke, slide motion and position, and speed are programmable to allow different combinations that can work with a variety of dies, part types and production speeds.

Characteristics of a mechanical servo press:

  • Variable stroke profiles.
  • Precise slide motion and position control throughout the range of the stroke.
  • Variable, precise slide-velocity control, even within a single cycle of the press stroke.
  • Full working energy at any speed.
  • Programmability of all of the above-mentioned parameters.
  • Full press capacity near stroke BDC.
  • Generally greater cycle speeds than a hydraulic press, in many cases approaching the speed of a traditional mechanical press.
  • High accuracy and repeatability.
  • Relatively high initial cost.

Two Types of Servo-Drive Systems

Metal formers can select from two types of servo-press drive technologies:

A link-assisted drive system provides a cost-effective solution that utilizes standard, off-the-shelf AC servo motors. A link or toggle mechanism coupled with the motors creates mechanical ratios that allow use of standard motor sizes from proven motor and control suppliers. No proprietary motors or motor controllers are required.

A direct-drive system employs proprietary, high-torque low-rpm motors specifically designed for press applications. These motors replace the standard motor, flywheel and clutch/brake in an otherwise traditional crankshaft-style mechanical press.

Regardless of drive type, servo presses will run from a proprietary control designed to allow for the wide variety of stroke and slide-movement profiles possible, while supplying full working energy even at low speeds. Unique profiles can be created by the user; each profile can include:

  • Cycle
  • Swing
  • Multipass
  • Simulation of link motion
  • Compound pressing and forging
  • Deep drawing and general forming
  • Perforation/blanking
  • Warm forming

With full working energy available at any speed and the ability to dwell anywhere in the stroke, servo presses are taking a big bite out of the drawn-and-formed parts pie. However, servos still are mechanical presses at heart, and achieve full tonnage capacity only near the bottom of the stroke. So, hydraulic presses—with full tonnage and energy through-out the entire stroke—still offer an advantage in many applications.

Pressmach Presses


Metalforming automation solutions

  • Single Die Series

  • Progressive die series

  • Multi-station Series

  • Uncoiling blanking line series

  • Conveyor stacking series

press feed lines,coil handling equipment,coil handling equipment,press feed line,coil feeding equipment,coil tilter,meta coil feeding machine,coil feed equipment,coil handling systems,back geared presses,metal coil feeding machine,die tryout press,double uncoiling reels,sheet metal coil handling equipment,meta coil feeder,press machine,press feeding equipment,press feed equipment,quick die change systems,mechanical briquette press,compact uncoiling feeding and straightening unit,roll feeders,coil feeding,2 in 1 compact decoilers,2 in 1 compact decoiler,2 in 1 compact decoiler straightener,2 in 1 compact decoilers/straighteners,coil handling,coil feeding line,ship-building presses,coil feed line,press mach,pressmach,cnc coil upender,stamping parts,hydropneumatic presses,coil feeding lines,four post trim presses,metal stamping,pneumatic presses,laser blanking line,shipbuilding presses,blanking-anlagen,multi blanking anlage,slitting machine,coil car,slip and drive coil feeder,pneumatic press,trimming press,metal stamping parts,bending parts,zigzag and press blanking lines,zigzag and press blanking line,hydraulic power pack,profimach,stamping,2 in 1 uncoiler,hydraulic power unit,sheet metal,steel coil handling equipment,sheet metal part,"coil handling equipment",swarf briquette machine,coil fed punching machines,stamping automation,used press machine,slit coil,progressive die,tension levelling line,servo zigzag feeding line,servo zigzag feeding lines,blanking lines for sheet metal,metal forming machine,vacuum feeder,sheet metal pressed components,multi-station cold forging machine,feeding machines,pressed sheet metal components,slitting,pressing machine,hydraulic press,sheet metal die cut,precision metal stamping factory,pressing machines,sheet metal punch shapes,sheet metal deep drawing,precision metal stamping,sheet metal forming parts,metal stamping bending parts,sheet metal stamping parts,forming parts,sheet metal components,precision sheet metal process,steel bending machine,cutting hot stamping machine,stamping tooling,tryout press,sheet metal cutting,feeding system,metal sheet cutting,pneumatic toggle clamp,pneumatic feeder for power press,hydraulic-pneumatic equipment,sheet metal parts,sheet metal bending product,steel coil feeding equipment,pneumatic gripper drawing,cnc sheet metal service,metal coil feeders,coil laser cutting machine,steel stamping parts,mechanical press,slitting line machine,conveyor feeder,metal forming machines,impression die forging,roll form machines,coil press,feeding equipment,hydraulic decoiler,hydraulic stamping press,press machines,metal slitting machine,press die components,sheet slitting machine,coil slitting machine,hydraulic deep drawing press,metal trimming,slitting line,hydraulic forging press,precision slitting machine,presses,open die forging,ejector die,stamping die