LOW COST GAP FRAME STYLE PRESS FRAMES AVAILABLE WITH MULTIPLE GUIDING OPTIONS
C-Frame presses - Gap-Frame Presses
Crank press machine uses crank slide block mechanism as working mechanism, machine driving system passes the movement and energy of electromotor to working mechanism, bringing forge to the die by slide block, in order to let roughcast engender transmutation. The gap frame power press is one of the categories of crank presses featuring an open frame, ie C frame or C body.
Pressmach mechanical C-frame or gap frame presses can be supplied with either gib or plunger type guiding which offers enhanced parallel slide motion and eccentric load capabilities. Our C-frame presses are available with a variety of options including:
- Single or multi point cushions
- Open back configurations
- Rotary tables
- Part ejector arrangements
- Quick die change packages
- Other enhancements as offered with
- 4-column presses
Our gap frame presses are economical and are ideal for applications where access is required from three sides.
Because the c frame power press has an open frame, it has outstanding advantages compared with the closed type press. The working table is open in three directions, it is convenient to install the mold and operate, and provides good conditions for mechanization and automation. Due to the convenient use of open type crank press, it is widely used in various industries. It is the main equipment in sheet metal stamping production. It can be used in punching, blanking, trimming, bending, shallow drawing and forming processes, and is widely used in national defense, aviation, automobiles, tractors, motors, electrical appliances, bearings, Instruments, agricultural machinery, agricultural tools, bicycles, sewing machines, medical equipment, daily hardware and other departments. In medium and small tonnage of presses, open type presses have been widely used and developed.
1-POINT C-FRAME PRESS
1-POINT GAP FRAME PRESS - SINGLE CRANK C-FRAME PRESS
The low-enertia press drivetrain on Pressmach’s 1-point gap frame press lines features gears manufactured with steel hubs, forged steel gear rings, finished and hardened gear teeth and an oil bath and spray system. Together, these features provide close running tolerances, prolonged life and smooth, quiet operation.
PRESS HIGHLIGHTS
All of our 1-point gap frame/Single Crank C Frame Press series provide important advantages for your operation:
Air-actuated wet clutch and brake deliver rated torque at relatively low air pressure, resulting in reduced lining wear and air consumption.
Greater heat dissipating characteristics promote longer life and better performance, even at high single-stroking rates.
Fast response hydraulic overload protection system relieves the pressure of a tonnage overload in milliseconds, stopping the press immediately and protecting the press and dies from damage.
Pressmach Single Crank C-Frame Press
The Single Crank series of open-type fixed table presses are general-purpose presses for sheet metal stamping. They are suitable for various cold stamping processes such as shearing, punching, blanking, bending and shallow drawing. The Presses are manufactured in strict accordance with Japanese JIS Class 1 accuracy standards.
Japanese high-quality bearings and imported oil seal linings ensure the accuracy and longevity of the machine.
2-POINT C-FRAME PRESSES
2-POINT GAP FRAME PRESSES
Pressmach's two-point gap frame press series is better suited for left-to-right, off-center loading and can accommodate larger dies, making them eligible for use in applications that commonly require a straight side press.
PRESS HIGHLIGHTS
Our 2-point gap frame mechanical stamping press offers important benefits for your stamping operation:
Air-actuated wet clutch and brake deliver rated torque at relatively low air pressure, resulting in reduced lining wear and air consumption.
Greater heat dissipating characteristics promote longer life and better performance, even at high single-stroking rates.
Finite element analysis prior to manufacturing each metal stamping press ensures proper design, superior strength and maximum resistance to deflection.
Double Crank C Frame Press
The series of open type double crank c frame mechanical press is one of the best selling products of our company. The main drive gears, shafts, etc. are all enclosed at the top of the machine frame. After the body is welded, it is tempered to eliminate the internal stress of the material. The main motor is mounted on the upper part of the frame, and the flywheel support, flywheel, clutch, etc. are installed on the rear side of the frame, and the flywheel is subjected to the assembly work after being tested for dynamic balance before assembly. The gear part adopts a spur gear transmission mechanism, and the material is made of high-strength alloy steel, and the corresponding heat treatment is performed. Clutch is dry one-piece clutch brake. The clutch brake control system is controlled by a double valve. All bearing bushes are made of copper and wear resistant materials.